Username: Password:
Members
Stats
  • Total Posts: 2958
  • Total Topics: 937
  • Online Today: 37
  • Online Ever: 223
  • (April 06, 2015, 12:26:53 PM)
Users Online
Users: 1
Guests: 19
Total: 22
Mick
Baidu (2)

Author Topic: Prophecy GX Pickup question  (Read 4826 times)

Online Mick

  • Administrator
  • Hero Member
  • *****
  • Posts: 692
  • Site Owner
    • guitarist-guild
    • View Profile
    • Guitarist Guild
Prophecy GX Pickup question
« on: May 09, 2015, 06:59:41 PM »
This question is aimed at Howard aka Hinfrance , because I know he owns a Prophecy Les Paul Custom Plus GX.

Howard, is your Epiphone Prophecy Les Paul Custom Plus GX one of the later versions (2012-Current), fitted with a Gibson USA 490R humbucker in the neck, and a Gibson USA 498T humbucker in the bridge position??

Also can you tell me roughly what heights you have the pickups set to, the distance between strings and the pickups especially the bridge pickup. Please.





Thank You, "Guest" For Reading This Post.

Camera Craniums

Guitarist Guild

Offline Hinfrance

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 260
    • View Profile
Re: Prophecy GX Pickup question
« Reply #1 on: May 10, 2015, 09:47:04 AM »
Morning Mick.

The serial number on my Prophesy indicates that it was made in July 2012 at the Quingdoa plant.

It does have the Gibson pickups.

OK, I got the vernier gauge out and hopefully have some numbers for you. Measured from the top of the string to the top of the PU/fretboard. The strings are 10s.

My measurements are as follows:

Bridge PU:
Low E nearest bridge 5.5mm
Low E at nearest neck 3.9mm
High E nearest bridge 3mm
High E nearest neck 2.5mm

Neck PU:
Low E 4.3mm both ends
High E 4.2mm both ends

It probably wants looking at again as I think that the neck PU is probably too high. But at my level of playing it isn't going to make too much difference!


Action height at the very end of the neck:
Low E 4.3mm
High E 2.8mm

Still plays beautifully and sounds, to my ears are least, rather wonderful. My old band's guitar player still heads straight for the Harley Benton 450L every time he visits and we have a jam. No class, that boy. :o

Online Mick

  • Administrator
  • Hero Member
  • *****
  • Posts: 692
  • Site Owner
    • guitarist-guild
    • View Profile
    • Guitarist Guild
Re: Prophecy GX Pickup question
« Reply #2 on: May 10, 2015, 10:02:38 AM »
Thanks Howard, seems quite different from mine, in fact the othe way around, my bridge pickup is only about (haven't got the measurements to hand atm, but around 3-3.5mm from height e to pickup body, and around the same for low e.   Neck is around 6mm

I've been advised to lower the pickups (bodies) to around 6mm and then adjust the poll pieces to get a even volume and tone to suite.  To get a bit more brightness out of it.  Just seemed a bit muddy compared to my Les paul standard PTP, and the HB L-450  plus, and want to improve it.

I'll measure again some time today, and compare them with yours.  Thank you.  :tup:
Thank You, "Guest" For Reading This Post.

Camera Craniums

Guitarist Guild

Offline Hinfrance

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 260
    • View Profile
Re: Prophecy GX Pickup question
« Reply #3 on: May 10, 2015, 11:29:05 AM »
I do try to avoid adjusting the pole pieces if I can . .

The way I go about making the adjustments is to start with the neck PU, raising it to a height that does not unduly impede the vibration of the strings.  Then I balance that PU by plucking the high and low E strings and adjust the height of each side of the PU to get as even a volume as I can. I then repeat the process with the bridge PU. Lastly I try to balance the volume of the two PUs by lowering the louder of the two until they have roughly the same apparent volume.

And then I spend a long time trying to play the darned things  :legit:

Offline Hinfrance

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 260
    • View Profile
Re: Prophecy GX Pickup question
« Reply #4 on: May 11, 2015, 11:37:41 AM »
PS Mick, let us know how you get on.

 

gear4music.com